LINK has decades of experience in the use of UHMWPE, and this was particularly valuable in the design of the cemented acetabular cups. The high quality of the polyethylene demonstrably minimizes abrasion suffered by the components, and thereby reduces the risk of osteolysis. Consequently, the incidence of component loosening is very low. In addition to the Standard UHMWPE, we also supply the system in acetabular cups made of X-LINKed UHMWPE, This highly crosslinked polyethylene make it possible to achieve even lower abrasion levels.2, 3, 7, 8
In addition to the material properties, the external shape of the acetabular cups helps to prevent loosening. Radial notches in the surface create a high degree of cement contact and allow air to escape when the implant is pressed into the cement bed.4 Furthermore, spacers on the rear surface of the acetabular cup permit a uniform cement coating. This surface design increases the stability of the cup in the acetabulum, thereby largely eliminating the risk of loosening This cup design is used successfully in the FAL and IP Polyethylene Acetabular Cups and also in the Lubinus Acetabular Cup.
Another feature of the cemented polyethylene acetabular cups is the high cup rim, which projects beyond the spherical shape. In addition, the FAL Acetabular Cup has a peripheral rim, unlike the IP Acetabular Cup and the LubinusAcetabular Cup. This rim increases the cement compression, which in turn makes for better stabilization of the cup in the cement coating.9 In combination with the LINK SPII Lubinus Femoral Stem, this system offers an outstanding, anatomically adapted, cemented hip prosthesis.